Configure Switching
124
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
The System Information page displays.
5. Select Switchingï€ > VLAN > Advanced > MAC Based VLAN.
The MAC Based VLAN Configuration page displays.
6. In the MAC Address field, enter a valid MAC address to be bound to a VLAN ID.
This field is configurable only when a MAC-based VLAN is created.
7. In the VLAN ID field, specify a VLAN ID in the range of 1 to 4093.
8. Click the Add button.
The MAC address is added to the VLAN mapping table.
Delete a MAC Address From VLAN Mapping
 To delete a MAC address from VLAN mapping:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Switchingï€ > VLAN > Advanced > MAC Based VLAN.
The MAC Based VLAN Configuration page displays.
6. In the MAC Address field, enter a valid MAC address.
This field is configurable only when a MAC-based VLAN exists.
7. In the VLAN ID field, specify a VLAN ID in the range of 1 to 4093.
8. Click the Delete button.
The MAC address is removed from the VLAN mapping.
Configure Protocol-Based VLAN Groups
You can use a protocol-based VLAN to define filtering criteria for untagged packets. By
default, if you do not configure any port-based (IEEE 802.1Q) or protocol-based VLANs,
To Next Page
Loading...
Need help?
General
