Hardware Specifications and Default Values
420
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Switch Specifications
The switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE
802.1p, and IEEE 802.1Q standards.
Switch Features and Defaults
The tables in this section provide information about the switch features and default values.
Table 93. Switch Specifications and Performance
Feature Value
GC728X 24 10/100/1000Mbps ports
Two 1G SFP ports
Two 10G/1G SFP+ ports
GC728XP 24 PoE+ 10/100/1000Mbps ports
Two 1G SFP ports
Two 10G/1G SFP+ ports
Flash memory size 8 MB SPI, 512 MB NAND
SRAM size and type 256 MB DDR3 SDRAM
Switching capacity Non-Blocking Full WireSpeed on all packet sizes
Forwarding method Store and Forward
Packet forwarding rate 10M:14,880 pps
100M:148,810 pps
1G:1,488,000 pps
MAC addresses 16K
Table 94. Feature Default Values and Default State
Feature Name/Parameter Default
Bonjour Enabled
SNMP Disabled
Routing Mode Disabled
DHCP L2 Relay
Global
Admin Mode Disabled
VLAN
Admin Mode Disabled
To Next Page
Loading...
Need help?
General
