Configure Switching
175
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
7. To refresh the information on the page, click the Refresh button.
The following table describes the nonconfigurable information displayed on the page.
Set the Dynamic Address Aging Interval
You can set the address aging interval for the specified forwarding database.
 To set the address aging interval:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Switching > Address Table > Advanced > Dynamic Address.
The Dynamic Address page displays.
6. In the Address Aging Timeout (seconds) field, specify the time-out period in seconds for
aging out dynamically learned forwarding information.
Table 47. MAC Address Table information
Field Description
Total MAC Address The number of total MAC addresses learned or configured.
VLAN ID The VLAN ID associated with the MAC address.
MAC Address The unicast MAC address for which the switch holds forwarding, filtering information, or
both. The format is a 6-byte MAC address that is separated by colons, for example
01:23:45:67:89:AB.
Interface The interface on which the address was learned.
Status The status of this entry, which can be one of the following:
• Static. The instance was added by the system or a user and cannot be relearned.
• Learned. The instance was learned, and is being used.
• Management. The value of the corresponding instance for the system MAC
address is also the value of an existing instance for dot1dStaticAddress.
To Next Page
Loading...
Need help?
General
