Monitor the System
378
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Monitor the Switch and the Ports
The following sections describe how you can view a variety of information about the amount
and type of traffic that is transmitted from and received on the switch:
• View or Clear the Switch Statistics on page 378
• View or Clear Port Statistics on page 380
• View or Clear Detailed Port Statistics on page 382
• View or Clear EAP Statistics on page 388
• Perform a Cable Test on page 390
View or Clear the Switch Statistics
You can view or clear detailed statistical information about the traffic that the switch handles.
 To view or clear the switch statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Monitoring > Ports > Switch Statistics.
The Switch Statistics page displays.
6. To refresh the page with the latest information about the switch, click the Refresh button.
7. To clear all the statistics counters, click the Clear button.
All switch summary and detailed statistics are reset to default values. However, the
discarded packets counters cannot be cleared.
To Next Page
Loading...
Need help?
General
