Configure System Information
70
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Manage the Bonjour Settings and View Bonjour
Information
A Mac OS device that supports Bonjour can discover the switch in the network so that you
can find the switch IP address and log in to the local browser interface of the switch. Bonjour
is enabled by default on the switch. You can disable Bonjour for security reasons.
Note: On a Mac OS device that does not support Bonjour, use the
NETGEAR Switch Discovery Tool. For more information, see
Determine the Switch IP Address Through the NETGEAR Switch
Discovery Tool and Access the Switch On-Network on page 16.
Manage the Bonjour Settings
 To manage the Bonjour settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > Management > Bonjour > Bonjour Configuration.
The Bonjour Global Configuration page displays.
6. Select one of the following radio buttons:
• Disable. Bonjour is disabled.
• Enable. Bonjour is enabled. This is the default setting.
7. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
