To Next Page

To Previous Page

Configure Switching

170

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports

Configure a Multicast Router VLAN for MLD Snooping

 To configure a multicast router VLAN for MLD snooping:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Access the Switch on page 13.

The login window opens.

4. Enter the switch’s password in the password field.

The default password is password. If you added the switch to a network on the Insight

app before and you did not yet change the password through the local browser interface,

enter your Insight network password.

The System Information page displays.

5. Select Switching> Multicast > MLD Snooping > Multicast Router VLAN Configuration.

The Multicast Router VLAN Configuration page displays.

6. From the Interface menu, select the interface for which you want the multicast router to be

enabled.

7. In the VLAN ID field, specify the VLAN ID.

8. From the Multicast Router menu, select to enable or disable the multicast router for the

VLAN.

9. Click the Apply button.

Your settings are saved.

Configure an MLD Snooping Querier

You can configure the settings for an MLD snooping querier.

 To configure an MLD snooping querier: