NETGEAR GC728X User Manual

Configure Switching
180
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
6. Use one of the following methods to narrow down the ports that are displayed:
• To display all the physical ports, click the 1 link.
• To display all LAGs only, click the LAG link.
• To display all ports and LAGs, click the All link.
• In the Go To Port field, type the port number, for example g18, and click the Go
button.
7. In the Port field, select the port for which data is to be displayed or configured.
8. From the Keep Alive menu, select Enable or Disable to specify whether keep-alives are
enabled on an interface.
The default is Disable.
9. From the RX Action menu, select the action that occurs when the switch detects a loop on
an interface:
• Log. The switch logs a message.
• Disable. The switch disables the interface. This is the default action.
• Both. The switch both logs a message and disables the interface.
10. Click the Apply button.
Your settings are saved.
11. To show the latest information on the page, click the Refresh button.
12. To clear all the statistics in the table, click the Clear button.

NETGEAR GC728X Specifications

General

Brand	NETGEAR
Model	GC728X
Category	Switch
Language	English