Unpack model GS710TUP
Figure 9. Model GS710TUP package contents
To check the package contents:
1.
Place the container on a clean flat surface, and cut all straps securing the container.
2.
Unpack the hardware from the boxes by carefully removing the hardware and placing
it on a secure and clean surface.
3. Remove all packing material.
4.
Verify that the package contains the following items:
•
Model GS710TUP switch.
•
AC power cable (varies by region).
•
A plastic bag that contains the following rack-mount installation components:
- Two brackets.
-
Eight small screws to attach the brackets to the switch (four small screws for
each side).
-
Four large screws and four washers to attach the brackets to the rack (two
screws and two washers for each side).
-
Four additional large screws of a different size to attach the brackets to the
rack, allowing you to select the most suitable set of screws for the rack.
Hardware Installation Guide31Installation
10-Port Gigabit Ethernet Ultra60 PoE++ Smart Managed Pro Desktop and Rackmount Switches
To Next Page
Loading...
