GS700TS Smart Switch Software Administration Manual
2-7 Introduction to the Web Browser Interface
v1.0, June 2009
To add an entry by creating a new entry in the table:
1. Enter the fields for the new entry in the provided fields in the first row.
2. Click ADD to update the device. The new entry is displayed.
Modifying an Entry
An entry may be modified by editing its values in the first row.
To modify an entry:
1. Select the entry to be modified. Its contents are displayed in the first row.
2. Modify the fields in the first row.
3. Click APPLY to update the device.
Figure 2-7
Figure 2-8
Figure 2-9
To Next Page
Loading...
