The Nighthawk M6 connectors are located on the rear panel. The connectors include
a USB Type-C connector, an RJ45 Ethernet port, and two antenna ports.
Figure 4. Nighthawk M6 connectors
Install or replace a SIM card
To use your mobile hotspot, you need to install a valid, activated nano SIM card with a
data plan from your mobile provider. If you change your mobile data provider or plan,
you might need to replace the SIM card that you previously installed.
User Manual11Overview and Setup
Nighthawk M6 Pro, Nighthawk M6
To Next Page
Loading...
