If you changed the SSID or password, your previously connected WiFi devices must
reconnect using the new credentials.
Change WiFi standby, range,
bandwidth, and info display settings
from the web user interface
To change WiFi standby, range, bandwidth, and info display settings from the web
user interface:
1. From the web user interface dashboard, select Settings > General > WiFi Band.
The WiFi Band page displays.
2. Click or tap More.
Additional settings display.
3. Select Global Settings.
The Global Settings page displays.
4. Select a WiFi Standby time period and WiFi Range setting.
5. Select a Bandwidth (channel frequency) option for each WiFi band that your device
supports.
6. To allow the WiFi information to be displayed on your mobile hotspot home screen,
leave the WiFi Info on Home check box selected.
7. To allow Wi-Fi Protected Setup (WPS) connections to your mobile hotspot, leave the
Enable WPS check box selected.
8. Click or tap Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
9. Click or tap Continue.
Your settings are saved.
User Manual61Access the web user interface
Nighthawk M6 Pro, Nighthawk M6
To Next Page
Loading...
Need help?
General
