NETGEAR MR6500 User Manual

The APN page displays.
3. Specify the APN name.
The APN name is a label for display in the UI.
4. Specify the APN.
This step specifies the APN as defined by the carrier.
5. Change the PDP (data protocol), if necessary:
•
IPV4
•
IPV6
•
IPV4V6
6. Change the PDP roaming protocol, if necessary:
•
None
•
IPV4
•
IPV6
•
IPV4V6
NOTE: PDP roaming protocol is the IP protocol used while you are roaming
(for example when you are traveling and the roaming network does not
support IPv6).
7. Select the network authentication mode:
•
None
•
PAP
•
CHAP
•
PAPCHAP
8. Enter the name and password, if they are required for the network.
9. Click or tap Add.
The entry is added to the table.
Select an APN to use
To select an APN to use:
1. From the web user interface dashboard, select Settings > Advanced > Cellular.
The Cellular page displays.
2. Select the Active radio button next to the APN entry.
The APN is selected.
User Manual72Access the web user interface
Nighthawk M6 Pro, Nighthawk M6

NETGEAR MR6500 Specifications

General

Model	MR6500
Category	Network Router
WiFi Technology	WiFi 6
5G Support	Yes
Ethernet Ports	1 x Gigabit Ethernet
USB Ports	1
SIM Card Slot	Yes
Battery Capacity	5040 mAh
Wi-Fi Speed	Up to 1.8 Gbps
Wireless Technology	802.11ax
Frequency Band	2.4GHz, 5GHz
Cellular Technology	4G LTE
External Antenna Ports	Yes
Security Features	WPA3
Weight	240 grams