The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Security > Screen Lock.
The Screen Lock page displays.
4. Tap OFF.
Your mobile hotspot prompts you to enter and confirm a four-digit passcode.
5. Using the on-screen keypad, enter and confirm a four-digit passcode of your choice,
then tap Ok.
Screen Lock is enabled.
6. To change your Screen Lock passcode after enabling it, tap the Pencil icon from the
Screen Lock page.
Your mobile hotspot prompts you to enter the current four-digit passcode, then
enter and confirm a new passcode.
Your Screen Lock passcode is changed.
7. To disable Screen Lock after enabling it, tap ON from the Screen Lock page.
Your mobile hotspot prompts you to enter the current four-digit passcode.
Screen Lock is disabled.
Enable or disable a WiFi schedule
You can configure your mobile hotspot to broadcast its WiFi connection only at certain
times during the day, or only on certain days. The WiFi Schedule is disabled by default.
NOTE: To set up the WiFi Schedule details, you must connect to your mobile
hotspot's web user interface. From the hotspot, you can only turn a previously
configured schedule on or off. For more information, see Configure a WiFi
schedule from the web user interface on page 66.
To enable or disable a WiFi Schedule:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Security > Schedule.
The Schedule page displays.
User Manual42Adjust network, security, and
performance settings
Nighthawk M6 Pro, Nighthawk M6
To Next Page
Loading...
Need help?
General
