The Internet page displays.
2. Click or tap WiFi + Cellular to enable WiFi offloading, or Ethernet + Cellular to
enable Ethernet offloading.
3. Click or tap Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
4. Click or tap Continue.
Your settings are saved.
Change WiFi band settings from
the web user interface
Your mobile hotspot can broadcast WiFi signals on two WiFi bands simultaneously.
Depending on your specific model, you might be able to use 2.4 GHz, 5 GHz, or 6 GHz.
Note that the overall throughput speed could decrease when WiFi dual-band is enabled.
To change WiFi band settings from the web user interface:
1. From the web user interface dashboard, select Settings > WiFi Band.
The WiFi Band page displays.
2. Select a WiFi band option.
Depending on your mobile hotspot model, the following options might be available:
•
Dual-Band (2.4 & 6 GHz)
•
Dual-Band (2.4 & 5 GHz)
•
6 GHz Only
•
5 GHz Only
•
2.4 GHz Only
•
Turn Off WiFi
3. Click or tap Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
4. Click or tap Continue.
Your settings are saved.
User Manual59Access the web user interface
Nighthawk M6 Pro, Nighthawk M6
To Next Page
Loading...
Need help?
General
