Change WiFi bands or enable
dual-band WiFi
By default, your mobile hotspot only broadcasts a WiFi signal on the 5 GHz band.
Depending on your WiFi needs, you can also broadcast on the 2.4 GHz band, which is
slower but has better range. If your device supports 6 GHz WiFi, you can also enable 6
GHz WiFi.
To change WiFi bands or enable dual-band WiFi:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap WiFi > Band.
The Band page displays.
4. Tap the band setting that you want your device to broadcast.
Your mobile hotspot temporarily pauses WiFi to change the settings.
5. Tap Ok.
Your WiFi band settings are saved.
Disable or re-enable WiFi
If you use your mobile hotspot to access the Internet with an Ethernet or tethering
connection, or if you are in an area where WiFi broadcasting is restricted, you might
want to disable WiFi. Disabling WiFi will reduce your mobile hotspot's power
consumption and increase the battery life.
To disable or re-enable WiFi:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap WiFi > Options > WiFi Signal.
The WiFi Signal page displays.
User Manual38Adjust network, security, and
performance settings
Nighthawk M6 Pro, Nighthawk M6
To Next Page
Loading...
Need help?
General
