NETGEAR MR90 - Factory Settings for Satellite Model MS90

Table 4. Factory default settings for the router (Continued)
Default SettingFeature
Disabled (except traffic on port 80,
the HTTP port)
Inbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
EnabledWiFi communicationWiFi
See router labelSSID name
WPA2-Personal + WPA3-PersonalSecurity
EnabledBroadcast SSID
Auto
1
Transmission speed
United States of America;
otherwise, varies by region
Country/region
AutoRF channel 2.4 GHz
Channel 44RF channel 5 GHz
Channel 37 (PSC)RF channel 6 GHz
-
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Factory settings for satellite model MS90
The following table shows the factory default settings for the satellite.
Table 5. Factory default settings for the satellite
Default SettingFeature
http://www.routerlogin.netUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
User Manual159Supplemental Information
Nighthawk Tri-band Mesh WiFi 6E