Specify an Internet connection without a login
To specify the Internet connection settings:
1.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Internet.
The Internet Setup page displays.
5.
In the WAN Preference section, select one of the following options:
•
Internet Port (2.5 Gbps). Select this option if you connected a modem to the
Internet port on your router.
•
WAN aggregation (2.5 Gbps + 1 Gbps). Select this option if you use Ethernet
port aggregation and connected a modem to the Internet port and Ethernet port
1 on your router.
6.
In the Does your Internet connection require a login? section, leave the No radio
button selected.
7.
If your Internet connection requires an account name or host name, click the Edit
button in the Account Name section and enter the account name.
8.
If your Internet connection requires a domain name, type it in the Domain Name (If
Required) field.
For the other sections on this page, the default settings usually work, but you can
change them.
9.
Select an Internet IP Address radio button:
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your
ISP automatically assigns these addresses.
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
User Manual25Specify Your Internet Settings
Nighthawk Tri-band Mesh WiFi 6E
To Next Page
Loading...
Need help?
General
