•
WPA2-Personal. This type of security is Wi-Fi Protected Access (WPA) version 2
with a pre-shared key. It uses WPA2-Personal standard encryption with the AES
encryption type.
•
WPA2-Personal + WPA-3 Personal. This type of security allows clients to use
either WPA2-Personal or WPA3-Personal.
•
WPA3-Personal. This type of security enables WiFi devices that support WPA3
to join the router’s WiFi network. WPA3 is the latest security standard and is more
secure than WPA2. 6 GHz devices must use WPA3 security.
7.
Click the Apply button.
Your settings are saved.
Add a WiFi network
The router and satellite have one default WiFi network, for which the WiFi network name
(SSID) and network key (password) are on the router label and on the satellite label. In
addition, the router can support three additional and separate WiFi networks: One
2.4 GHz WiFi network, one 5 GHz WiFi network, and one 6 GHz WiFi network.
If you add a WiFi network, the router automatically sends the new settings to the satellite
so that both the router and satellite broadcast the new WiFi network.
To add a WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Customize WiFi Network.
The Customize WiFi Network page displays.
User Manual66Manage WiFi Settings
Nighthawk Tri-band Mesh WiFi 6E
To Next Page
Loading...
