NETGEAR Nighthawk AX8 AX6000 User Manual

Nighthawk AX8 8-Stream AX6000 WiFi Router
UseVPNtoAccessYourNetwork 129 User Manual
14. Click the Install button.
The window displays the progress of the installation and then displays the final installation
page.
15. Click the Finish button.
16. Unzip the configuration files that you downloaded and copy them to the folder where the
VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at C:\Program
files\OpenVPN\config\ by default.
17. For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a. On your computer, go to the Networks page. If you are using Windows 10, select Control
Panel > Network and Sharing Center > Change adapter settings.
b. In the local area connection list, find the local area connection with the device name TAP-
Windows Adapter.
c. Select the local area connection and change its name (not its device name) to NETGEAR-
VPN.

NETGEAR Nighthawk AX8 AX6000 Specifications

General

WiFi Range	Very large homes
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
WiFi Performance	AX6000
WiFi Bands	2.4GHz and 5GHz
Ethernet Ports	1 WAN and 4 LAN Gigabit Ethernet ports
Processor	Quad-Core 1.8GHz processor
Memory	512MB NAND flash and 1GB RAM
USB Ports	USB 3.0 ports
Antenna	8 high-performance antennas
Security	WPA3, VPN