Nighthawk AX8 8-Stream AX6000 WiFi Router
Optimize Performance 82 User Manual
Use Dynamic QoS to Optimize Internet Traffic
Management
Dynamic Quality of Service (QoS) helps improve your router’s Internet traffic management
capabilities through better application and device identification, bandwidth allocation, and traffic
prioritization techniques. Dynamic QoS resolves traffic congestion when the Internet bandwidth
is limited and different demands compete for bandwidth.
Enable Dynamic QoS
Because not everyone uses Dynamic QoS, it is disabled by default.
To enable Dynamic QoS:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select QoS.
The QoS page displays.
4. Select the Enable QoS check box.
5. Specify your Internet bandwidth:
• Let Speedtest detect my Internet bandwidth. We recommend that you use Speedtest
to detect your Internet bandwidth. To use Speedtest, do the following:
a. For more accurate Speedtest results, make sure that no other devices are accessing
the Internet.
b. Select the Let Speedtest detect my Internet bandwidth radio button.
c. Click the Take a Speedtest button.
Speedtest determines your Internet bandwidth.
• I want to define my Internet Bandwidth. If you know what your download and upload
speed are, select this radio button and enter your download and upload speeds in the
fields.
6. Click the Apply button.
To Next Page
Loading...
Need help?
General
