Nighthawk AX8 8-Stream AX6000 WiFi Router
The
Manage Network Settings 56 User Manual
reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the router’s
DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and
renew.
Edit a reserved IP address
To edit a reserved address entry:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays.
4. Select the radio button next to the reserved address that you want to edit.
5. Click the Edit button.
The Address Reservation page displays.
6. Change the settings.
7. Click the Apply button.
Your settings are saved.
Delete a reserved IP address entry
To delete a reserved address entry:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays.
To Next Page
Loading...
Need help?
General
