Nighthawk AX8 8-Stream AX6000 WiFi Router
Control Access to the Internet 46 User Manual
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Security > Block Sites. The Block Sites page displays.
4. Scroll down and select the Allow trusted IP address to visit blocked sites check box.
5. In the Trusted IP Address field, enter the IP address of the trusted computer.
6. Click the Apply button.
Your settings are saved.
Manage network access control lists
You can use access control to block or allow access to your network.
To manage devices that are allowed or blocked:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to
the network.
2. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Security > Access Control. The Access Control page displays.
4. Select the Turn on Access Control radio button.
5. Click the View list of allowed devices not currently connected to the network link.
The list displays.
6. Select the check box for a device.
7. Use the Add button, Edit button, and Remove from the list button as needed.
8. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
