Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Network Settings 57 User Manual
4. Select the radio button next to the reserved address that you want to delete.
5. Click the Delete button.
The address is removed.
Use the WPS Wizard for WiFi connections
The WPS Wizard helps you add a WPS-enabled device to your WiFi network without typing the
WiFi password.
To use the WPS Wizard:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > WPS Wizard. A note explaining WPS displays.
4. Click the Next button.
The WPS page displays.
5. Select a setup method:
• Push button. Click the WPS button on this page.
• PIN Number. The page adjusts. Enter the client security PIN and click the Next button.
6. Within two minutes, go to the WPS-enabled device and use its WPS software to connect to
the WiFi network.
WPS process automatically sets up yourr WPS-enabled device with the network
password when it connects. The router WPS page displays a confirmation message.
Specify Basic WiFi Settings
The router comes with preset security. This means that the WiFi network name (SSID), network
key (password), and security option (encryption protocol) are preset in the factory. You can find
the preset SSID and password on the router label.
To Next Page
Loading...
Need help?
General
