Nighthawk AX8 8-Stream AX6000 WiFi Router
Specify Your Internet Settings 34 User Manual
• Router’sIPv6AddressonLAN. This field shows the IPv6 address that is acquired for the
router’s LAN interface. The number after the slash (/) is the length of the prefix, which is
also indicated by the underline (_) under the IPv6 address. If no address is acquired, the
field displays Not Available.
5. (Optional) In the User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name, enter it
here.
6. (Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the IPv4
ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz as the
domain name. If your ISP provided a domain name, type it in this field. For example,
Earthlink Cable might require a host name of home, and Comcast sometimes supplies a
domain name.
7. Select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but some IPv6
systems might not support the DHCv6 client function.
• Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home
network (the LAN).
8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be used
for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC address.
9. Select an IPv6 Filtering radio button:
• Secured. In secured mode, which is the default mode, the router inspects both TCP and
UDP packets.
• Open. In open mode, the router inspects UDP packets only.
10. Click the Apply button.
Your settings are saved.
Set Up an IPv6 PPPoE Internet Connection
To set up a PPPoE IPv6 Internet connection:
To Next Page
Loading...
Need help?
General
