Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Network Settings 59 User Manual
10).
8. Click the Apply button.
Your settings are saved.
If you connected wirelessly to the network and you changed the SSID, you are disconnected
from the network.
9. Make sure that you can connect wirelessly to the network with its new settings. If you cannot
connect wirelessly, check the following:
• Is your computer or mobile device connected to another WiFi network in your area? Some
WiFi devices automatically connect to the first open network without WiFi security that
they discover.
• Is your computer or mobile device trying to connect to your network with its old settings
(before you changed the settings)? If so, update the WiFi network selection in your
computer or mobile device to match the current settings for your network.
Change the WiFi Mode
To change the WiFi mode settings:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time you logged
in. The user name and password are case-sensitive.
BASIC Home page displays.
3. Select Wireless.
The Wireless Settings page displays.
4. In the Wireless Network (2.4 GHz b/g/n) section, select a WiFi mode from the Mode menu.
• Up to 54 Mbps. This mode allows 802.11n, 802.11g, and 802.11b devices to join the
network but limits 802.11n devices to functioning at up to 54 Mbps.
• Up to 600 Mbps. This mode allows for reduced interference with neighboring WiFi
networks. This mode allows 802.11n, 802.11g, and 802.11b devices to join the network
but limits 802.11n devices to functioning at up to 600 Mbps.
To Next Page
Loading...
Need help?
General
