Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Port Forwarding and 140 User Manual
Port Triggering
The service is now in the list on the Port Forwarding/Port Triggering page.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding
/ Port Triggering page displays.
4. Leave the Port Forwarding radio button selected as the service type.
5. In the table, select the radio button next to the service name.
6. Click the Edit Service button.
The Ports - Custom Services page displays.
7. Change the settings as needed.
8. Click the Apply button.
Your settings are saved.
Delete a Port Forwarding Entry
To delete a port forwarding entry:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding
/ Port Triggering page displays.
4. Leave the Port Forwarding radio button selected.
To Next Page
Loading...
Need help?
General
