Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Network Settings 80 User Manual
1. Set up Internet port aggregation on your modem.
For information about how to set up Internet port aggregation on your modem, see the
documentation that came with your modem.
2. Log in to your router and enable Internet port aggregation:
a. Launch a web browser from a computer or mobile device that is connected to the router
network.
b. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that
you logged in. The user name and password are case-sensitive. The BASIC Home page
displays.
c. Select Internet.
The Internet Setup page displays.
d. In the WANPreference section, select the WANaggregation(1Gbps+1Gbps) radio button.
e. Click the Apply button.
Your settings are saved.
3. Connect the Internet port and Ethernet port 1on your router to two Ethernet ports on your
modem.
To Next Page
Loading...
Need help?
General
