11. To display the dowloading status, click the Refresh button.
12. Click the Apply button.
Your settings are saved.
13. (Optional) Use the Pause, Resume, and Delete buttons to manage the downloading tasks.
The completed downloading tasks display in the Downloaded Files section.
Change the NETGEAR Downloader Settings
You can change the default save path to any directory on the USB storage device that is connected to the
router.You can change the maximum number of concurrent downloading tasks, but NETGEAR recommends
3 as the most effective setting.You can enable autorefresh to see updated downloading tasks, but this might
slow down speed of the downloads.
To change NETGEAR Downloader settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > NETGEAR Downloader (BETA) > Downloader Settings.
The NETGEAR Downloader Settigns page displays.
5. Make any needed changes.
6. Click the Apply button.
Your settings are saved.
Set Up Email Notifications for NETGEAR Downloader
The router can email you when a downloader task is finished.
To change NETGEAR Downloader settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > NETGEAR Downloader (BETA) > Downloader Settings.
Share USB Storage Devices Attached to the Router
100
Nighthawk X10 AD7200 Smart WiFi Router
To Next Page
Loading...
Need help?
General
