NETGEAR R9000 User Manual

Edit a Static Route
To edit a static route:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Edit button.
The Static Routes page adjusts.
7. Edit the route information.
8. Click the Apply button.
Your settings are saved.
Delete a Static Route
To delete a static route:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Network Settings
69
Nighthawk X10 AD7200 Smart WiFi Router

NETGEAR R9000 Specifications

General

Processor	1.7GHz Quad-Core Processor
RAM	1GB
Flash Memory	512MB
WiFi Technology	802.11ac
WiFi Band	2.4GHz, 5GHz
Ethernet Ports	6 x 10/100/1000Mbps Gigabit Ethernet ports
USB Ports	Two USB 3.0 ports
Antenna	4 external antennas
Security	WPA/WPA2-PSK