NETGEAR R9000 User Manual

Table 3. Factory default settings (Continued)
Default settingFeature
EnabledWireless communicationWireless
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
1
Transmission speed
United States in the US; otherwise, varies by regionCountry/region
Auto for 2.4 GHz, CH 44 for WW SKU, and CH 153 for
North America SKU
RF channel
Up to 800 Mbps at 2.4 GHz, 1773 Mbps at 5 GHz, 4.6 Gpbs
at 60 GHz
Operating mode
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Technical Specifications
Table 4. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and
SMB
Data and routing protocols
• North America: 100V, 50/60 Hz input
• UK, Australia: 220V, 50/60 Hz, input
• Europe: 100–240V, 50/60 Hz input
• All regions (output): 19V/3.16 ADC output
Power adapter
8.81 x 6.61 x 2.91 in. (224 x 168 x 74 mm)Dimensions
4.11 lb (1865 g)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
Supplemental Information
156
Nighthawk X10 AD7200 Smart WiFi Router

NETGEAR R9000 Specifications

General

Processor	1.7GHz Quad-Core Processor
RAM	1GB
Flash Memory	512MB
WiFi Technology	802.11ac
WiFi Band	2.4GHz, 5GHz
Ethernet Ports	6 x 10/100/1000Mbps Gigabit Ethernet ports
USB Ports	Two USB 3.0 ports
Antenna	4 external antennas
Security	WPA/WPA2-PSK