Table 4. Router specifications (Continued)
DescriptionFeature
FCC Part 15 Class B
EN 55022 (CISPR 22), Class B C-Tick N10947
Electromagnetic emissions
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45WAN
10G SFP+ LAN port
Maximum WiFi signal rate complies with the IEEE 802.11 standard.
2
Wireless
Auto Rate SensingRadio data rates
• IEEE® 802.11b/g/n 2.4 GHz 256 QAM support
• IEEE 802.11a/n/ac 5.0 GHz 256 QAM support
• IEEE 802.11ad 60 GHz
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node (typically
50–70 nodes).
Maximum computers per
wireless network
AD7200 WiFi
3
• Up to 800 Mbps @ 2.4 GHz 256 QAM
• Up to 1733 Mbps @ 5 GHz 11ac 256 QAM
Operating frequency range
WPA2-PSK and WPA/WPA2802.11 security
2
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
3
NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future
standards.
Supplemental Information
157
Nighthawk X10 AD7200 Smart WiFi Router
To Previous Page
Loading...
Need help?
General
