Need help?Do you have a question about the NETGEAR R9000 and is the answer not in the manual?
General| Processor | 1.7GHz Quad-Core Processor |
|---|---|
| RAM | 1GB |
| Flash Memory | 512MB |
| WiFi Technology | 802.11ac |
| WiFi Band | 2.4GHz, 5GHz |
| Ethernet Ports | 6 x 10/100/1000Mbps Gigabit Ethernet ports |
| USB Ports | Two USB 3.0 ports |
| Antenna | 4 external antennas |
| Security | WPA/WPA2-PSK |
Step-by-step instructions for connecting the router to a modem and power.
Methods for connecting devices to the router via wired Ethernet or WiFi.
Instructions for accessing the router's web interface for configuration.
Guidance on automatically setting up the router's internet connection.
Procedure for logging into the router's web interface using admin credentials.
Guide to automatically detect and configure internet settings using the wizard.
Steps for manually configuring internet connection settings without a login.
Viewing and configuring Wide Area Network (WAN) settings for the router.
Modifying the router's Local Area Network (LAN) IP address and subnet mask.
Configuring essential WiFi network settings like SSID and security.
Updating the WiFi network's password and security encryption protocol.
Checking for and installing the latest router firmware updates.
Securing router access by changing the admin password and setting up recovery.
Establishing a virtual private network (VPN) connection for secure remote access.
Steps to resolve issues preventing login to the router's interface.
Diagnosing and fixing problems with internet connectivity.
To Next Page
