Change the WiFi Mbps Settings
The data rate for high-speed transmissions is commonly identified as megabits per second (Mbps). By
default, the router is set to operate with up to 800 Mbps in the 2.4 GHz WiFi band, up to 1,733 Mbps in the
5 GHz WiFi band, and up to 4.6 Gbps in the 60 GHz WiFi band.You can select slower settings.
To change the WiFi Mbps settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays.
5. For the 2.4 GHz WiFi band, in the Wireless Network (2.4 GHz b/g/n) section, select a setting from the
Mode menu.
Up to 800 Mbps is the default setting.The other settings are Up to 347 Mbps and Up to 54 Mbps.
6. For the 5 GHz WiFi band, select a setting from the Mode menu.
Up to 1733 Mbps is the default setting, which allows 802.11ac, 11n, and 11ad WiFi devices to join the
network. The other settings are Up to 800 Mbps and Up to 347 Mbps.
For the 60 GHz WiFi band, you can only select Up to 4.6 Gbps.Note
7. Click the Apply button.
Your settings are saved.
Change the WiFi Password or Security Level
Your router comes with preset WPA2 or WPA security.The password that you enter to connect to your
network is unique to your router and is on the label on the router. We recommend that you use the preset
security, but you can change the settings. Do not disable security.
To change the WPA settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
Network Settings
57
Nighthawk X10 AD7200 Smart WiFi Router
To Next Page
Loading...
Need help?
General
