S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Specifications and Default Settings User Manual355
General Feature Default Settings
The following table describes the general feature default settings.
Default VLAN name Default
Voice VLAN Disabled
RADIUS-assigned VLANs Disabled
Multiple Spanning Tree Disabled
Link aggregation No link aggregation groups (LAGs) configured
LACP system priority 32768
DiffServ Enabled
IGMP snooping Enabled
IGMP snooping querier Disabled
Table 74. General feature default settings
Feature Name/Setting Default
Virtual LAN (IEEE 802.1Q)
Default VLANs • 1 (Default). All ports are members.
• 4089 (Auto-V
ideo). No ports are members.
PVID 1
Acceptable frame types Admit All
Ingress filtering Disabled
Port priority 0
Ports
Frame size 1500
Flow control Disabled
802.1X
Port-based authentication state Disabled
VLAN assignment mode Disabled
Dynamic VLAN creation mode Disabled
Table 73. Switch default settings (continued)
Feature Default
To Next Page
Loading...
Need help?
General