EasyManuals Logo

NETGEAR S350 Series User Manual

NETGEAR S350 Series
365 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #249 background imageLoading...
Page #249 background image
S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Manage Device Security User Manual249
Set Up Traffic Control
You can configure MAC filters, storm control, port security, and protected port settings.
Manage MAC Filtering
You can create MAC filters that limit the traffic allowed into and out of specified ports on the
switch.
Create a MAC Filter
If a packet with a MAC address and VLAN ID that you specify for a filter is received on a port
that is not part of the inbound filter, the packet is dropped.
A packet with a MAC address and VLAN ID that you specify for a filter can be transmitted
only from a port that is part of the outbound filter.
To create a MAC filter:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Security > T
raffic Control > MAC Filter > MAC Filter Configuration.

Table of Contents

Other manuals for NETGEAR S350 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR S350 Series and is the answer not in the manual?

NETGEAR S350 Series Specifications

General IconGeneral
BrandNETGEAR
ModelS350 Series
CategorySwitch
LanguageEnglish

Related product manuals