S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Specifications and Default Settings User Manual360
Class of Service (CoS), Interface
Trust mode 802.1p
Interface shaping rate 0
802.1p to queue mapping (802.1p –> queue)
Note: By default, eight 802.1p priorities are mapped to
four CoS queues.
0 -> 1
1 -> 0
2 -> 0
3 -> 1
4 -> 2
5 -> 2
6 -> 3
7 -> 3
Queue minimum bandwidth 0
Queue scheduler type Weighted
Auto-VoIP, Protocol-Based
Auto VoIP mode Disabled
Prioritization type Traffic class
Auto-VoIP traffic class 7
Auto-VoIP, OUI-Based
Auto VoIP mode Disabled
Auto-VoIP VLAN None
OUI-based priority 7
L2 Loop Protection
Global L2 loop protection (“Admin Mode”) Disabled
TLV advertised interval 5
Maximum number of PDUs received 1
Recovery time 0
Table 74. General feature default settings (continued)
Feature Name/Setting Default
To Next Page
Loading...
Need help?
General