NETGEAR S350 Series User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure System Information User Manual68
View Green Ethernet Information for Remote Devices
To view green Ethernet information for remote device:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select System > Management > Green Ethernet >
Green Ethernet Details.
The Green Ethernet Details page displays.
6. Scroll down to the Remote Device Information section.
7. Select the interface.
The following table describes the nonconfigurable fields.
Table 18. Green Ethernet Remote Device Information
Field Description
Remote ID The remote client identifier that is assigned to the remote system.
Remote Tw_sys_tx (uSec) The value in uSecs of the Tw_sys that the remote system can support.
Remote Tw_sys_tx Echo
(uSec)
The value in uSecs of the Transmit Tw_sys that is echoed back by the remote
system.
Remote Tw_sys_rx (uSec) The value in uSecs of the Tw_sys that the remote system requests from the
switch.
Remote Tw_sys_rx Echo
(uSec)
The value in uSecs of the Receive Tw_sys echoed back by the remote system.
Remote Fallback Tw_sys
(uSec)
The value in uSecs of the fallback Tw_sys that the remote system is advertising.

NETGEAR S350 Series Specifications

General

Brand	NETGEAR
Model	S350 Series
Category	Switch
Language	English