Set Up a Link Aggregation Group...............................................73
Make a Link Aggregation Connection........................................74
Enable a Link Aggregation Group...............................................74
Manage Multicast...............................................................................75
Manage IGMP Snooping...............................................................75
Enable a VLAN for IGMP Snooping.............................................76
Manage Blocking of Unknown Multicast Addresses.................77
Manage IGMPv3 IP Header Validation........................................77
Set Up a Static Router Port for IGMP Snooping.........................78
Change the IP Address of the Switch...............................................79
Reenable the DHCP Client of the Switch.........................................80
Chapter 6 Maintain and Monitor the Switch
Manually Check for New Switch Firmware and Update the
Switch...................................................................................................83
Manage the Configuration File.........................................................84
Back Up the Switch Configuration...............................................84
Restore the Switch Configuration................................................85
Return the Switch to Its Factory Default Settings............................86
Use the RESET Button to Reset the Switch..................................86
Use the Local Browser Interface to Reset the Switch.................87
Use the RESET Button to Renew the DHCP IP Address or Reenable
DHCP....................................................................................................88
Control Management Access to the Switch....................................88
Change or Lift Access Restrictions to the Switch............................89
Manage the DoS Prevention Mode..................................................90
Manage the Power Saving Mode.....................................................91
Control the Port LEDs.........................................................................92
Control the Power LED......................................................................93
Change the Switch Device Name.....................................................93
View System Information...................................................................94
View Switch Connections...................................................................94
View the Status of a Port....................................................................95
Chapter 7 Diagnostics and Troubleshooting
Test a Cable Connection...................................................................97
Reboot the Switch From the Local Browser Interface....................98
Detect a Network Loop......................................................................98
Resolve a Subnet Conflict to Access the Switch.............................99
Appendix A Factory Default Settings and Technical Specifications
Factory Default Settings..................................................................101
Technical Specifications..................................................................102
6
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
To Next Page
Loading...
Need help?
General
