NETGEAR S8000

6
Maintain and Monitor the Switch
This chapter describes how you can maintain and monitor the switch.
The chapter contains the following sections:
• Manually Check for New Switch Firmware and Update the Switch
• Manage the Configuration File
• Return the Switch to Its Factory Default Settings
• Use the RESET Button to Renew the DHCP IP Address or Reenable DHCP
• Control Management Access to the Switch
• Change or Lift Access Restrictions to the Switch
• Manage the DoS Prevention Mode
• Manage the Power Saving Mode
• Control the Port LEDs
• Control the Power LED
• Change the Switch Device Name
• View System Information
• View Switch Connections
• View the Status of a Port
82