NETGEAR WG302 - 802.11g ProSafe Wireless Access Point - Page 110

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
C-4 Command Line Reference
July 2005 v3.0
get set del keyword Description
--- --- --- ---------------------- -------------------------------
[X] [X] [X] | `-4 --4th remote AP address for repeater
mode
[X] [X] [X] |-acl --wireless access control
[X] [X] | |-mode --enable wireless access control
(ACL)
[X] [X] [X] | `-list --
[X] | |-all --(delete only) all local ACL address
[X] [X] [X] | `-(null) --edit local ACL address
[X] [X] |-rogue ap detection --Rogue AP Detection
[X] [X] [X] |-identified ap list --identified AP list
[X] | |-all --empty identified AP list
[X] [X] [X] | `-(null) --edit identified AP list
[X] |-association --list of associated wireless clients
[X] |-wlanstats --wlan statistics
[X] [X] |-authentication --wireless authentication type
[X] [X] |-encryption --wireless data encryption
[X] [X] [X] |-key --wireless wep key setting
[X] [X] | |-type --wireless wep key type
[X] [X] | |-default --wireless wep default key index
[X] [X] [X] | |-passphrase --wireless wep passphrase key
[X] [X] [X] | |-1 --wireless wep key 1
[X] [X] [X] | |-2 --wireless wep key 2
[X] [X] [X] | |-3 --wireless wep key 3
[X] [X] [X] | `-4 --wireless wep key 4
[X] [X] [X] |-wpa --wireless WPA setting
[X] [X] [X] | |-psk --wireless pre-shared key (PSK) for
WPA-PSK
[X] [X] | |-reauthtime --wireless WPA re-auth period (in
seconds)
[X] [X] | `-keyupdate --enable wireless WPA global key
update
[X] [X] | |-mode --wireless WPA global key update
condition
[X] [X] | `-interval --wireless WPA global key update
interval
[X] [X] | |-sec --wireless WPA global key update
interval (in seconds)
[X] [X] |-autocell
[X] [X] | |-mode --autocell mode
[X] [X] | `-super privacy --avoid other wlan
[X] [X] `-wmm --wmm settings