NETGEAR WG302 - 802.11g ProSafe Wireless Access Point

Questions and Answers:

L
Lisa GuerraSep 9, 2025
What to do if no lights are lit on my NETGEAR WG302 - 802.11g ProSafe Wireless Access Point?
- W
  wolsonSep 9, 2025
  If no lights are lit on the access point, ensure the power cord is connected to the access point and the power adapter is connected to a functioning power outlet. If it is in a power strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it is not a switched outlet. Also, make sure you are using the correct NETGEAR power adapter supplied with your access point.
L
Laura OrtizSep 12, 2025
How to fix NETGEAR WG302 - 802.11g ProSafe when no lights are on?
- L
  lisalarsenSep 12, 2025
  If no lights are lit on your NETGEAR Wireless Access Point, the device likely has no power. Make sure the power cord is connected to the access point and that the power adapter is connected to a functioning power outlet. If it's in a power strip, ensure the power strip is turned on. If plugged directly into the wall, verify it's not a switched outlet. Finally, ensure you're using the correct NETGEAR power adapter supplied with your access point.
A
Andrea PadillaSep 12, 2025
What to do if I get a timeout error when accessing my NETGEAR WG302?
- M
  Michael CookSep 12, 2025
  If you encounter a timeout error when entering a URL or IP address while trying to access your NETGEAR WG302, first check if other PCs are working correctly. If they are, ensure that your PC's TCP/IP settings are correct, checking the Subnet Mask, Default Gateway, DNS, and IP Addresses if you're using a Fixed (Static) IP Address. If the PCs are configured correctly but still not working, ensure that the WG302 is connected and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN and power connections. If the WG302 is configured correctly, check your Internet connection (DSL/Cable modem etc.) to ensure that it is working correctly. You can also try again.
K
Katherine WhiteSep 14, 2025
How to troubleshoot NETGEAR WG302 - 802.11g ProSafe when Wireless LAN activity light is off?
- B
  Brooke RussellSep 15, 2025
  If the Wireless LAN activity light stays off on your NETGEAR Wireless Access Point, disconnect the adapter from its power source and then plug it in again. Also, ensure the antennas are tightly connected to the WG302. If the Wireless LAN activity light remains off, contact NETGEAR technical support.

NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Specifications

General

Wireless Standard	802.11g
Frequency Band	2.4 GHz
Data Rate	Up to 54 Mbps
Antenna Type	External
Antennas	2
Security	WEP, WPA, WPA2
Ports	1 x 10/100 Ethernet
Power Supply	12V DC

Summary

About This Manual

Audience, Scope, Conventions, and Formats

Defines the manual's intended audience, scope, and typographical conventions used.

How to Use This Manual

Explains how to navigate and utilize the HTML version of the manual effectively.

How to Print this Manual

Provides instructions for printing pages, chapters, or the full manual.

Introduction to WG302 Access Point

About the NETGEAR WG302 Access Point

Describes the WG302 as a basic building block for wireless LAN infrastructure.

Key Features of the WG302 Access Point

Highlights supported standards, security features, and operating modes of the WG302.

System Requirements for WG302 Installation

Lists the necessary system prerequisites for installing and configuring the WG302.

Whats In the WG302 Product Box

Details the items included in the WG302 access point package.

WG302 Hardware Description and LEDs

Describes the front and rear hardware features and LED indicators of the WG302.

Basic Installation and Configuration

Placement and Range Guidelines for WG302

Provides guidelines for optimal placement of the WG302 for best wireless coverage.

Default Factory Settings of the WG302

Lists the default user name, password, IP address, and other configurations.

Understanding WG302 Wireless Security Options

Explains various methods to enhance wireless network security, including MAC filtering and encryption.

Setting Up and Testing Basic Wireless Connectivity

Guides users through establishing and verifying basic wireless network connectivity.

How to Configure WEP Encryption on WG302

Step-by-step guide for setting up Wired Equivalent Privacy (WEP) for wireless security.

How to Configure WPA-PSK on WG302

Provides instructions for configuring WPA-PSK, a strong security measure for home networks.

How to Configure WPA2-PSK on WG302

Details the steps to set up WPA2-PSK for enhanced wireless security.

Management and Maintenance of WG302

Remote Management Settings for WG302

Configures remote access options like SSH and SNMP for managing the access point.

Upgrading WG302 Access Point Software

Instructions for downloading and installing new firmware to update the access point's software.

WG302 Configuration File Management

Describes how to save, retrieve, or reset the access point's configuration settings.

Changing the WG302 Administrator Password

Provides steps to change the default administrator password for enhanced security.

Advanced Configuration Options for WG302

Understanding Advanced Wireless Settings

Explains advanced wireless features like AutoCell RF Management and WMM.

Enabling Wireless Bridging and Repeating

Details how to configure the WG302 for wireless bridging and repeating functions.

Configuring WG302 as a Point-to-Point Bridge

Step-by-step guide to setting up the WG302 in Point-to-Point Bridge mode.

Troubleshooting Common WG302 Issues

Troubleshooting: No Lights on Access Point

Provides steps to diagnose and resolve issues where the access point has no power.

Troubleshooting: Wireless LAN Activity Light Off

Guides users on troubleshooting when the Wireless LAN activity light is not illuminated.

Troubleshooting: Cannot Connect to WG302

Provides solutions for problems preventing connection to the WG302 for configuration.

Appendix A: WG302 Specifications

Specifications for the WG302 Wireless Access Point

Details technical specifications including data rates, frequencies, encryption, and compliance.

Appendix B: Wireless Networking Basics

Wireless Networking Overview

Explains the 802.11b/g standards and wireless network configurations like ad hoc and infrastructure.

WPA and WPA2 Wireless Security

Explains WPA/WPA2 security standards, benefits, and comparison to WEP.

Appendix C: Command Line Reference

Command Line Interface (CLI) Command Sets

Lists available commands for configuring and managing the WG302 via CLI.

Related product manuals

WG602 - 54 Mbps Wireless Access Point