NETGEAR WGX102 User Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
6-4 Maintenance
September 2004 202-10042-01
This screen shows the following parameters:
Table 6-1. Access Point Status fields
Field Description
Device Name The Host Name assigned to the WGX102.
Firmware Version The range extender’s firmware version.
LAN Port These parameters apply to the local powerline port of the WGX102.
MAC Address The Media Access Control address used by the LAN port of the
WGX102.
IP Address The IP address used by the local port of the WGX102. The default is
192.168.0.101
IP Subnet Mask The IP Subnet Mask used by the local port of the WGX102. The default
is 255.255.255.0
DHCP Identifies if the range extender’s built-in DHCP server is active for the
powerline attached devices.
Wireless Port These parameters apply to the Wireless port of the WGX102.
Name (SSID) The wireless network name (SSID) used by the wireless port of the
WGX102. The default is NETGEAR.
Region The geographic region where the range extender is being used. It may
be illegal to use the wireless features of the WGX102 in some parts of
the world.
Channel Identifies the wireless channel being used. See “Wireless Channels” on
page D-7 for the frequencies used on each channel.
Mode g and b, b only, or g only
Broadcast Name Shows whether the range extender is broadcasting its name.

NETGEAR WGX102 Specifications

Weight and Dimensions

dimensions	3 x 8.6 x 6.5 in, 75 x 220 x166 mm
weight	2.0 lb