- ENGLISH -
- 53 -
HTTP
Using the HTTP (Hyper Text Transfer Protocol), the status of the UPS can be monitored by means
of a web browser without having to install additional software. All the most popular web browsers
(Internet Explorer, Safari, Firefox, Netscape Navigator, Konqueror, Opera) are supported.
Once the hostname or the NetMan plus IP address has been inserted in your web browser, a
screen like the one shown below will be displayed, with the main UPS operating data.
Example of display via HTTP
The following buttons are found on the left-hand side of the page:
• Nominal Data: opens a page displaying the nominal values of the UPS, the list of active
alarms and a diagram of UPS operation (see image on next page)
• Telnet: opens a Telnet session (see paragraph “Telnet”)
• FTP: opens an FTP session (see paragraph ”FTP”)
• About: opens a page with copyright information
To Next Page
Loading...