NetMan plus - Hardware Specifications and Battery; Battery Type and Replacement; NetMan 101 Plus Hardware Specs; NetMan 102 Plus Hardware Specs

- ENGLISH -
- 89 -
BACKUP BATTERY
The device uses a backup battery for the correct clock working and for maintenance of the
historical data in case of power loss.
In case of long period of inactivity disconnect the battery. It’s recommended to replace the battery
every three years.
If you have to change the battery ensure that the positive side (+) is facing upwards.
Battery type: CR1620 3V Lithium
(only for NetMan 101 plus): In order to change the battery the power supply
connector, network cable and serial cables must be disconnected. Remove the four
screws located in the lower part of the device and remove the cover
TECHNICAL SPECIFICATIONS
NetMan 101 plus
POWER SUPPLY
(1)
Input voltage
[Vdc]
12
Maximum inputcurrent
[mA]
200
ENVIRONMENTAL
CONDITIONS
Operating temperature
[°C]
0 ÷ +40
Storage temperature
[°C]
-5 ÷ +50
Operating relative humidity
[%]
80 (max)
Storage relative humidity
[%]
90 (max)
PHYSICAL
CHARACTERISTICS
Dimensions H x L x D
[mm]
28 x 77 x 158
Weight
[g]
250
(1)
Connector polarity:
NetMan 102 plus
POWER SUPPLY
Input voltage
[Vdc]
12
Maximum inputcurrent
[mA]
200
ENVIRONMENTAL
CONDITIONS
Operating temperature
[°C]
0 ÷ +40
Storage temperature
[°C]
-5 ÷ +50
Operating relative humidity
[%]
80 (max)
Storage relative humidity
[%]
90 (max)