NetMan plus - Multi-Device Configuration; FTP Configuration File Transfer

- ENGLISH -
- 86 -
Configuration of several devices
If several devices requiring similar configuration parameters are to be installed, it may be useful to
save the basic configuration to file and then load it on all the devices to be installed. After
completing device configuration, save it by selecting the option “Save to file” from the Save and
load menu (a “netman.config” file will be created). The file can be downloaded from the device and
loaded on another via FTP (see paragraph “FTP”). Once the file has been loaded, select the option
“Load from file” from the Save and load menu and, if necessary, change the configuration for the
new device.
Example of FTP connection for multiple installations