EasyManua.ls Logo

NetMan plus - Modem Configuration; Modem Dialing Parameters

NetMan plus
90 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- ENGLISH -
- 73 -
Modem config menu
/------------------------/
/ Modem config /
/------------------------/
Phone number 1.:111
Phone number 2.:112
Phone number 3.:113
Modem init.....:ATE0X0V0S0=1
Modem dial.....:ATDT
No. repeat.....:3
Delay..........:30
With this menu the modem can be configured as described in the following table.
Field Parameters to be inserted
Phone number 1
Enter the telephone numbers to be called
Phone number 2
Phone number 3
Modem init Enter the modem initialization string (see note)
Modem dial Enter the dialling string used by the modem (see note)
No. Repeat Enter the number of attempts to be made if there is no reply
Delay Enter the interval of time between two calls if there is no reply
the modem initialization string (Modem init) recommended for the U.S. Robotics
modem is ATE0X0V0S0=1;
the dialling string (Modem dial) recommended for the U.S. Robotics modem is ATDT

Table of Contents