NetMan plus - Modem Logic and Event Handling; Event-Based Modem Call Logic; Modem Event Descriptions

- ENGLISH -
- 74 -
Modem logic menu
/------------------------/
/ Modem logic /
/------------------------/
Tel. 1 Tel. 2 Tel. 3 Logic:
UPS Lock.......: X<-- X X And
Ovrload/Ovrtemp: X X X And
UPS Failure....: X X X And
On bypass......: X X X And
Battery work...: X X X And
Battery low....: X X X And
Communic lost..: X X X And
With this menu it can be established which telephone numbers will be called and with which mode
when certain events occur. One or more telephone numbers can be associated with each event.
use the ENTER key to change the selected configuration (“X”, “0”, “AND”, “OR”)
• X: when the event occurs, NetMan plus is enabled to call the corresponding telephone
number (see “Modem logic menu” to set the telephone numbers to be called);
• 0: when the event occurs, NetMan plus does not call the corresponding telephone number;
• AND: when the event occurs, all the enabled telephone numbers will be called;
• OR: when the event occurs, only one of the enabled telephone numbers is called: if all the
call attempts for the first enabled telephone number fail, the device calls the next enabled
telephone number (see “Modem logic menu” to set the number of attempts to be made and
the interval of time between two calls if there is no reply).
The tables below describe the meaning of the events. These can vary according to the UPS
connected.
Events Meaning
UPS Lock UPS is locked
Ovrload/Ovrtemp UPS in overload or in overtemperature
UPS Failure Failure of the UPS
On bypass Operation from bypass
Battery work Operation from battery