NetMan plus - Miscellaneous Device Settings; Logging and UDP Port Settings; SNMP System Information

- ENGLISH -
- 77 -
Miscellaneous menu
/------------------------/
/ Miscellaneous /
/------------------------/
Log frequency..:5 sec
UDP Port.......:33000
sysContact.....:Administrator
sysName........:My Server
sysLocation....:new building
With this menu further device parameters can be configured as described in the following table.
Field Parameters to be inserted
Log frequency
Enter the delay, measured in seconds, between one data log and the next
(see paragraph “Datalog”)
UDP Port Enter the port where the UDP service is started
(1)
sysContact
Enter the string to be associated with these SNMP variables
sysName
sysLocation
(1)
This port must be the same as configured in the UPSMon software