- ENGLISH -
- 67 -
IP config menu
/------------------------/
/ IP config /
/------------------------/
Hostname.......:ups_server
IP address/DHCP:dhcp
Netmask........:
Gateway........:
Primary DNS....:
Secondary DNS..:
Mailhost.......:
With this menu the main network parameters can be set as described in the following table.
Field Parameters to be inserted
Hostname Enter the NetMan plus host name
IP address/DHCP Enter the IP address for a static IP; enter “DHCP” for a dynamic IP
Netmask Enter the netmask to be used together with the static IP address
Gateway Enter the name or the address of the network gateway
Primary DNS Enter the name or the address of the preferred DNS to be used
Secondary DNS Enter the name or the address of the alternative DNS to be used
Mailhost
Enter the name or the address of the SMTP server to be used to send e-
mails.
(1)
(1)
Ensure that the SMTP server accepts connections on port 25.
If a static IP address is assigned to the device, all the fields must be configured with
the network parameters. If a dynamic IP address is assigned, just enter ‘dhcp’ in the
“IP Address/DHCP” field and provide a hostname; all the other options should be
ignored because these are automatically configured with DHCP
To Next Page
Loading...