- ENGLISH -
- 81 -
Example: how to connect a Temperature sensor, a Humidity & Temperature sensor and a Digital
I/O & Temperature sensor in exactly this order.
Sensors Devices
Press [C] to change sensors, [E] to exit
Connect the first sensor (Temperature), and press “Y”.
Sensors Devices
[1] Sensor Temperature (F100000013BE0628)
+ Temperature
Press [Y] to confirm, [N] to insert a new sensor
Wait until the first sensor is identified and then connect the second sensor (Humidity &
Temperature), and press “N”.
Sensors Devices
[1] Sensor Temperature (F100000013BE0628)
+ Temperature
[2] Sensor Humidity (4D00000083FF3326)
+ Humidity
+ Temperature
Press [Y] to confirm, [N] to insert a new sensor
Wait until the second sensor is identified and then connect the third sensor (Digital I/O &
Temperature), and press “N”.
Sensors Devices
[1] Sensor Temperature (F100000013BE0628)
+ Temperature
[2] Sensor Humidity (4D00000083FF3326)
+ Humidity
+ Temperature
[3] Sensor Digital I/O
+ Temperature (510000009A154228)
+ Digital I/O (BB0000003BA2FF12)
+ 1 Input
+ 1 Output
Press [Y] to confirm, [N] to insert a new sensor
Press “Y” to confirm.
To Next Page
Loading...